Eddy Current Brakes

Truck brakes CFK Series

KLAM offers several truck brake models designed to be installed in the driveline of the vehicles.

Series CFK models are designed to be installed in the vehicle chassis in line with the drivelines. Standard mounting configuration consists of transmission, driveshaft, KLAM, driveshaft, and rear axle. The KLAM stator is fixed to the chassis with brackets and rubber mounts, while the driveshafts are attached to the rotors. Main applications of this type of model are trucks, front engine buses, dynamometer applications and wind turbines.

DOWNLOAD SUCCESS STORY

Truck Brake CFK Series

> MAIN FUTURES
  • Torque from 600 to 4660 Nm.
  • Vehicles from 6 to 70t.
  • Modular, interchangeable tread assembly.
  • Designs of 8 or 16 coils in copper or aluminum.
  • Coils protected against knocks.
  • 12V, 24V, 96V or 192V.
  • All materials approved by U / L.
  • Interchangeable pole plates.
> Technical specifications
KLAM RETARDERS
MODEL TORQUE (NM) M.M.A. (t)
K-40 400 3,5 - 5
CFK-65 690 4 - 6,8
CFK-90 930 6,5 – 10
CFK-140 1730 10 – 15
CFK-200 2000 15 – 18
CFK-300 2600 18 – 24
CFK-360 3180 24 – 44
CFK-390 3370 24 – 44
CFK-500 3820 >44
CFK-500ML 4660 INDUSTRIAL
Download technical data sheet

ADVICE
PERSONALIZED

Fill in the following form and an expert will contact you.